What to Look For In an Acoustic Guitar

Choosing the right acoustic guitar for your child, or yourself is a very important process as there are many options available in the market. You should start by deciding how you wish to use your guitar.

The way you intend to use your guitar can narrow down your search and options. Apart from that, here are a few things you should look for in an acoustic guitar to make sure you buy the right one.

1.     Electronics

If you wish to perform or use your acoustic guitar in front of a large crowd, you need access to electronic systems such as preamplifiers and pickups. Some acoustic guitars also come with preamps mounted within them on the side of the guitar, while others have them mounted on the inside of the sound hole. You can also go for systems that all it all together; a preamplifier, piezo pickups, tuners, EQ, and a microphone.

2.     Intonation

Intonation is a very important characteristic of any guitar, and it determines if the notes will play in tune as you move your finger upwards on the neck.

If the distance between the frets is not correct, the guitar will not be able to produce the notes and play in tune, thus making the guitar useless.

3.     Body style

Acoustic guitars are available in a wide spectrum of shapes and sizes, ranging from travel-size guitars to jumbo ones. It is important to consider the body style as it affects the sound projection and tone emphasis.

You should consider how comfortable it is to play the guitar and the tonal quality. You can find an acoustic guitar with a single-cutaway design and a double-cutaway design. This design allows you greater access to the upper frets.

Image Source

4.     Fingerboard and bridge

The bridge and fingerboard are a very important part of your guitar and affect the quality of the sound produced. However, they are not as important as the body of the guitar. This is why it is important to use high-quality materials for making the fingerboard and bridge.

5.     Tonewood

The quality and type of wood determine the sound produced by an acoustic guitar. The type of wood used determines the tonal quality. The majority of guitar makers use spruce as the standard material. The type of wood also affects the cost of the guitar.

6.     Tuning machines

Tuning machines are a very important part of your guitar. They allow you to hold pitch and fine-tune. Tuning machines that are well covered and enclosed are resistant to rust and corrosion and therefore do not need to be replaced and do not require as much maintenance as open tuning machines.

7.     Neck

The size of your hand determines the type of neck you should choose. The width and thickness of the neck usually depend on the size of the guitar’s body and how many frets the neck has to hold. The majority of the guitars have necks that have 12 to 14 frets.

8.     The guitar’s finish

The guitar’s finish can affect the vibration of the wood, but you can not choose or change the finish. The type of finish is selected by the guitar maker, and they usually know which finishing to use.

In a nutshell

The above-mentioned aspects of the guitar are very important to consider when buying your guitar. A good guitar can last your entire life, so you must do your research before making the final decision. Whatever you decide, take care of the instrument.

1 comment

Leave a Reply

Your email address will not be published. Required fields are marked *